GB 9685-1994 食品容器、包装材料用助剂使用卫生标准
作者:标准资料网 时间:2024-05-12 17:44:45 浏览:8900
来源:标准资料网
基本信息
| 标准名称： | 食品容器、包装材料用助剂使用卫生标准 |
| 英文名称： | Hygienic standard for adjuvants and processing aids in food containers and packaging materials |
| 中标分类： |
医药、卫生、劳动保护 >>
卫生 >>
食品卫生 |
| ICS分类： |
食品技术 >>
食品综合
|
| 替代情况： | GB 9685-1988;被GB 9685-2003代替 |
| 发布部门： | 中华人民共和国卫生部 |
| 发布日期： | 1994-01-24 |
| 实施日期： | 1994-08-01 |
| 首发日期： | 1900-01-01 |
| 作废日期： | 2004-05-01 |
| 归口单位： | 卫生部食品卫生监督检验所 |
| 起草单位： | 卫生部食品卫生监督检验所 |
| 出版日期： | 1900-01-01 |
| 页数： | 平装16开， 页数：6， 字数：7千字 |
适用范围
本标准规定了食品容器、包装材料用助剂品种、使用范围和最大使用量。本标准适用于生产塑料、橡胶、涂料等食品容器、包装材料和食品机械设备、工用具时所使用的助剂。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类： 医药 卫生 劳动保护 卫生 食品卫生 食品技术 食品综合
【英文标准名称】:EnergyStandardforBuildingsExceptLow-RiseResidentialBuildings
【原文标准名称】:除低层住宅外的建筑物的能量标准
【标准号】:ANSI/ASHRAE/IESNA90.1e-2004
【标准状态】:作废
【国别】:美国
【发布日期】:2004
【实施或试行日期】:
【发布单位】:美国国家标准学会(ANSI)
【起草单位】:ANSI
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:Energyconservations;Low-energyhouses;Thermalenvironmentsystems;Utilityequipment
【摘要】:
【中国标准分类号】:P31
【国际标准分类号】:91_010_30;91_040_30;91_140_99
【页数】:
【正文语种】:英语
Product Code:SAE J1962
Title:Diagnostic Connector Equivalent to ISO/DIS 15031-3:December 14, 2001
Issuing Committee:Vehicle E E System Diagnostic Standards Committee
Scope: This document supersedes SAE J1962 FEB1998, and is technically equivalent to ISO/DIS 15031-3:December 14, 2001. This document is intended to satisfy the requirements of an OBD connector as required by U.S. On-Board Diagnostic (OBD) regulations. The diagnostic connection specified in this document consists of two mating connectors, the vehicle connector and the external test equipment connector. This document specifies: a. The functional requirements for the vehicle connector. These functional requirements are separated into four principal areas: connector location/access, connector design, connector contact allocation, and electrical requirements for connector and related electrical circuits, b. The functional requirements for the external test equipment connector. These functional requirements are separated into three principal areas: connector design, connector contact allocation, and electrical requirements for connector and related electrical circuits.Differences from ISO Document. The ISO 15031-3 document is intended to satisfy the requirements of OBD requirements in countries other than the U.S., and includes functionality not required or not allowed in the U.S. Notable exceptions are: a. Proposed U.S. OBD regulations specify a connector location that is more restrictive than specified in this document. b. Proposed U.S. OBD regulations do not allow greater than 20 V at the SAE J1962 connector. Only the Type A connector as defined in this document is allowable. Differences between the documents are highlighted in the technical requirements sections of this document. Deleted text is highlighted with strikethrough and new text is highlighted with bold italic. NOTE - To maintain equivalency of the documents, a comma is used as a decimal marker for numeric values in this document.
Rationale: This document supersedes SAE J1962 FEB1998, and is technically equivalent to ISO/DIS 15031-3:December 14, 2001. This document is intended to satisfy the requirements of an OBD connector as required by U.S. On-Board Diagnostic (OBD) regulations. The diagnostic connection specified in this document consists of two mating connectors, the vehicle connector and the external test equipment connector. This document specifies: a. The functional requirements for the vehicle connector. These functional requirements are separated into four principal areas: connector location/access, connector design, connector contact allocation, and electrical requirements for connector and related electrical circuits, b. The functional requirements for the external test equipment connector. These functional requirements are separated into three principal areas: connector design, connector contact allocation, and electrical requirements for connector and related electrical circuits.Differences from ISO Document. The ISO 15031-3 document is intended to satisfy the requirements of OBD requirements in countries other than the U.S., and includes functionality not required or not allowed in the U.S. Notable exceptions are: a. Proposed U.S. OBD regulations specify a connector location that is more restrictive than specified in this document. b. Proposed U.S. OBD regulations do not allow greater than 20 V at the SAE J1962 connector. Only the Type A connector as defined in this document is allowable. Differences between the documents are highlighted in the technical requirements sections of this document. Deleted text is highlighted with strikethrough and new text is highlighted with bold italic. NOTE - To maintain equivalency of the documents, a comma is used as a decimal marker for numeric values in this document.
